Guaranteed eradication of termites within 24 hours.
The only treatment that guarantees a 100% success rate. Satisfaction guaranteed or your money back.
Budget friendly, two times cheaper than other treatments per square meter treated.
Either dilute the solution or apply it pure directly on the termites.
Suitable for all types of construction (flooring, walls, frames, etc.).
Simple application: just spray in trenches or water abundantly.
Safe for users and residents of the treatment site.
Durable: the treatment provides protection against termites for 10 years.
TREATED AREA PER LITER AND DILUTION
- For prevention: 20-meter linear trenches (or 10 square meters for abundant watering) for 1 liter of concentrate. Dilution of 1 liter of concentrated solution in 49 liters of water, or 50 liters of ready-to-use treatment.
- To eradicate existing termites: 4-meter linear trenches (or 2 square meter for abundant watering) for 1 liter of concentrate. Dilution of 1 liter of solution in 9 liters of water, or 10 liters of ready-to-use treatment.
- Spray Application: 20 square meters of concentrated solution. Pure application.
Instructions:
- For preventive use, dilute 1 liter of concentrated solution in 49 liters of water. That will give you 50 liters of ready-to-use treatment and you can fill a 20-meter linear trench or abundantly water 10 square meters.
- To eradicate existing termites, dilute 1 liter of concentrated solution in 9 liters of water. That will give you 10 liters of ready-to-use treatment and you can fill a 4-meter linear trench or abundantly water 2 square meters.
- For pre-construction treatment:
- Spread 4 to 5 liters of diluted solution using a watering can over the entire surface of the future building. Don’t forget the foundation and the trenches.
- For post-construction treatment:
- Treatment of wood and frames:
- Spray the diluted solution (or pure solution) over the entire surface and on the termites. Termites then spread the solution between each other, which ensures termites that aren’t present when you spray will still be eradicated. This avoids perforating wood that may be weakened by the termites.
- Treatment of outdoor ground surfaces:
- For natural surfaces, make a 40x40cm trench around the house at the base of the walls and fill it with the diluted solution.
- For manmade surfaces, drill vertical holes every 15 to 20 centimeters to create an injection line. Inject 1 liter of diluted solution per hole.
- Treatment of interior ground surfaces:
- For manmade surfaces, drill vertical holes every 15 to 20 centimeters to create an injection line. Inject 1 liter of diluted solution per hole.
- For beaten-earth floors, use a watering can to spread 4 to 5 liters of diluted solution over the entire surface.